Removing door panel

I removed my passenger door panel (front) as there was a little rattle (buzzing) coming from inside the door while driving, It was rreally annoying. I retorqued the bolts for the lock Mechanism and problem solved. Also this is how you would access the indoor speaker

To remove the door panel u will need 1 Philipe Screwdriver

To Begin remove the tweeter that is near the window, u simply squeeze and pull on the plastic, then unclip the speaker wire.
There are 3 screws to remove.
First screw is in the door handle Lever, u need to remove the little palstic cap over the screw
Second Screw is in the handle near the window button. Once again u need to remove the plastic cap
Third screw is under a round cap on the edge of the plastic closest to the B pillar.

Once u have removed these 3 screws u simply pull on the door panel to pop out the clips but be carefull to pull evenly as you will brake some clips.

I have pictures of all this if u need to see how its made,

If you can post your picture that could help others for sure a post with picture is always better