front black out. my 2 cents
Page 1 of 2 • Share •
Page 1 of 2 • 1, 2 
front black out. my 2 cents
Everyone wants to do the front blackout on the lancer. Unless your lancer is black. these are some options and what i think of them.
Kit from the dealership. 180$ and useless.

fiber glass or carbon fiber insert found @ RRM or Scorpion kits and other websites.
They require cutting the front bumper and removing safety foam from inside and then using silicone or other adhesives to stick them on. I think its too much work and non reversible if u screw it up. Also more expesinve then painting it the front black

Plasti dip (the cheapest option)
15$ a can, ull need 2 cans or more if u want it to last long as ull need to spray alot of it.
Fairly easy to apply and comes off easy as well. but its impossible to clean bugs off it and dust gets stuck in the texture then u have lines in it scrubbing too hard. I used it for one day on the bumber and took it off. also had it on some interior pieces in my previous car and it was impossible to keep clean.
Painting it black.
Unless done right its going to peel off and chip. Ever price a pint of paint and clearcoat with hardner for our lancers? You would think its made of gold.
Vinyl
I chose matt black vinyl for my car as i think its the most effective for the price its cleanable and weatherproof. cost ranges from 60$ to 80$ installed onto the car. you can also get carbon fiber look or any color you want. Vinyl is never 100% perfect and easily replaced if it ever does get damaged. Do not buy a precut kit as it will look like the dealer kit.

Other options, Evo look-a-like front bumper but then your just wasting money because its expensive and stock fog lights wont fit in those and painting to match is not easy if you have never done it before.
As for the chrome grille. 80$ plus shipping will get a new black grille from Mitsubishiparts.net
Ill fix spelling mistakes later
Kit from the dealership. 180$ and useless.

fiber glass or carbon fiber insert found @ RRM or Scorpion kits and other websites.
They require cutting the front bumper and removing safety foam from inside and then using silicone or other adhesives to stick them on. I think its too much work and non reversible if u screw it up. Also more expesinve then painting it the front black

Plasti dip (the cheapest option)
15$ a can, ull need 2 cans or more if u want it to last long as ull need to spray alot of it.
Fairly easy to apply and comes off easy as well. but its impossible to clean bugs off it and dust gets stuck in the texture then u have lines in it scrubbing too hard. I used it for one day on the bumber and took it off. also had it on some interior pieces in my previous car and it was impossible to keep clean.
Painting it black.
Unless done right its going to peel off and chip. Ever price a pint of paint and clearcoat with hardner for our lancers? You would think its made of gold.
Vinyl
I chose matt black vinyl for my car as i think its the most effective for the price its cleanable and weatherproof. cost ranges from 60$ to 80$ installed onto the car. you can also get carbon fiber look or any color you want. Vinyl is never 100% perfect and easily replaced if it ever does get damaged. Do not buy a precut kit as it will look like the dealer kit.

Other options, Evo look-a-like front bumper but then your just wasting money because its expensive and stock fog lights wont fit in those and painting to match is not easy if you have never done it before.
As for the chrome grille. 80$ plus shipping will get a new black grille from Mitsubishiparts.net
Ill fix spelling mistakes later
Re: front black out. my 2 cents
I put the vinyl on also and did the plasti-dip for my grill. I used one full can on my grill and I don't have any problems with bugs or dirt sticking but I let it cure for 48hrs before replacing it.

Demonweb- Posts: 100
Join date: 2010-04-25
Location: Cornwall On.
Re: front black out. my 2 cents
yeah i got it on my grille to. Its ok for the bugs and dirt, i tihnk its cause it small and round.
Re: front black out. my 2 cents
I have a black GTS so painting it isn't the issue for me, but when I picked up the car they put my plate on by screwing it directly to the centre strip. I was thinking of getting the off-centre plate holder and replacing the chrome trim at the top, but how would I patch those screw holes?

Malvos- Posts: 26
Join date: 2010-07-23
Location: South Keys
Re: front black out. my 2 cents
lots of places like canadian ire and parts source sell rubber plugs that go in the holes.
Re: front black out. my 2 cents
enkrypter_DJ wrote:lots of places like canadian ire and parts source sell rubber plugs that go in the holes.
Thanks, now is there any way to get the chrome accent around the entire grill like the Ralliart without replacing the whole front bumper? Or is it just better to get the blacked out accent?

I don't like the lower chrome option.


Malvos- Posts: 26
Join date: 2010-07-23
Location: South Keys
Re: front black out. my 2 cents
yes u can get the chrome arund it like the ralliart, people make it themselves using 1/4 chrome bodyside moulding costs around $15
Re: front black out. my 2 cents
awesome info. I contacted the guy that you went with, and he said $100 for the bumper cap. so... little more pricey than we might've thought i guess, but still might go for it. if its good quality

JimmyA7X- Posts: 198
Join date: 2010-06-05
Location: Bayshore
Re: front black out. my 2 cents
dont do it for 100$, go to wrapit.ca they said 50 to 75 installed. its more work then they think so it will probly be 80$, dont do it for 100$ I did mine for 60$ and he said he might charge 80$ next time because its more work then he assumed
Re: front black out. my 2 cents
wild, i never thought to look for these kind of places. there is another place called "sign it signs" i guess that does it too, i'll try to get quotes from both of them i supose

JimmyA7X- Posts: 198
Join date: 2010-06-05
Location: Bayshore
black out film
LOL at 180$$$ where did you get that pricing !!!
black out kit mz314054 retail at 57.42$$$
pete68
black out kit mz314054 retail at 57.42$$$
pete68

pete68- Posts: 64
Join date: 2008-10-13
Location: gatineau
Re: front black out. my 2 cents
pete68 wrote:LOL at 180$$$ where did you get that pricing !!!
black out kit mz314054 retail at 57.42$$$
pete68
when i checked @ bank street he tolled me 180 installed
Re: front black out. my 2 cents
i believe that 57$ blackout kit is only for the front bumper, not the blacked DE grille as well. It's the DE grill that add's so much price

JimmyA7X- Posts: 198
Join date: 2010-06-05
Location: Bayshore
Re: front black out. my 2 cents
mine's done
waiting for plastidip to dry hihi 

Chuck- Posts: 522
Join date: 2009-05-24
Location: Gatineau (Templeton)
Page 1 of 2 • 1, 2 
Similar topics» I need some front fork bushes..
» CONTACT FRONT Airsoft
» Independant Front Suspension
» EVO UPGRADED BRAKE KIT FRONT - USE WITH 17x8J ET25 TOMBINOS
» The Black Beret
» CONTACT FRONT Airsoft
» Independant Front Suspension
» EVO UPGRADED BRAKE KIT FRONT - USE WITH 17x8J ET25 TOMBINOS
» The Black Beret
Page 1 of 2
Permissions in this forum:
You cannot reply to topics in this forum